Assembly Guide — Sections, Bolts, Brackets & Power | LED Sign City
Preparing your PDF…
Building the assembly guide for your {{ w }} × {{ h }} ft sign. This takes a few seconds.
✓
Your PDF has downloaded
Check your downloads folder for {{ pdfName }}.
Assembly guide

Putting your sign up? We'll walk you through it.

Tell us your sign's size and we'll show how it ships, every bolt and bracket, and how to wire power and signal. Every count is for your size only.

Assembly guide {{ sizeChip }}
Sign size

How big is your sign?

Nominal size in feet — one module is 12.6″ (about 1 ft) square. Nothing over 4 ft ships as one piece, so we'll split it into sections for you.
{{ l.label }}
{{ pvSecs }} sections {{ pvMods }} modules Actual face {{ pvFace }}
Seen from the front. Yellow lines are where sections bolt together; letters are the order they're mounted and wired, starting with A.
{{ qKicker }}

{{ qTitle }}

{{ qNote }}
{{ stepKicker }}

{{ stepTitle }}

Back view · {{ sideLabel }}

{{ stepBody }}

{{ photoTitle }}

{{ photoNote }}

{{ p.cap }}
{{ p.head }}
{{ p.step }} {{ p.cap }}
Tools you must provide
{{ t.k }} {{ t.v }}
Not included with the sign.
Sign size: {{ w }} × {{ h }} ft
Width{{ w }} ft Height{{ h }} ft
{{ d.n }} {{ d.title }}
{{ m8Math }} {{ m8MathNote }}
{{ b.label }}
{{ d.cap }}
{{ d.n }} {{ d.title }}
{{ b.label }}
{{ d.cap }}
{{ diagramTitle }}
{{ sizeLabelShort }}
Try your size H {{ h }} ft W {{ w }} ft
{{ powerTotal }}{{ powerTotalNote }}
{{ side1Title }}
{{ heightIn }}″
{{ faceL }}
{{ faceR }}
{{ b.label }}
{{ b.dims }}
{{ t.label }}
{{ t.label }}
{{ t.label }}
{{ t.label }}
{{ p.label }}
{{ p.sub }}
{{ widthIn }}″
{{ side2Title }}
{{ l.label }}
Panel
{{ r.k }} {{ r.v }}
Sections · {{ sectionCountLabel }}
{{ r.label }} {{ r.dims }} {{ r.mods }} {{ r.watts }} {{ r.weight }}
{{ splitNote }}
Power · {{ volts }} V
{{ r.k }} {{ r.v }}
{{ c.name }} {{ c.serves }} {{ c.load }}
{{ powerNote }}
{{ bomTitle }}click a part for its step
{{ r.k }} {{ r.k }} {{ r.sub }} {{ r.v }}
{{ m10Note }}
Counts follow our standard build: sections capped at 4 ft and split evenly, 95 W per module, 20 A breakers. Installation assumes you, or a contractor you've hired, can safely lift, mount and wire the sign.