LED Sign Assembly Planner — Sections, Bolts, Brackets & Circuits | LED Sign City
Home › Support › Assembly planner
Installer tools

Interactive assembly & power planner

Enter the sign size. The planner splits it into shippable sections, plots every bolt and bracket the installer touches on site, and sizes the {{ volts }} V circuits. Modules are 12.6″ square, 95 W each.

Fixed Letter pages, exactly as shown — two steps per sheet where they fit. Leave scale and margins on Default in the print dialog.
Height
{{ h }} ft
Width
{{ w }} ft
Configuration
Controllers
Supply

{{ stepTitle }}

Back view · {{ sideLabel }}

{{ stepBody }}

{{ photoTitle }}
{{ p.cap }}
{{ p.step }} {{ p.cap }}
{{ diagramTitle }}
{{ sizeLabelShort }}
{{ heightIn }}″
{{ faceL }}
{{ faceR }}
{{ b.label }}
{{ b.dims }}
{{ t.label }}
{{ t.label }}
{{ t.label }}
{{ t.label }}
{{ p.label }}
{{ p.sub }}
{{ widthIn }}″
{{ l.label }}
{{ stepCounter }}
Panel
{{ r.k }} {{ r.v }}
Sections · {{ sectionCountLabel }}
{{ r.label }} {{ r.dims }} {{ r.mods }} {{ r.watts }} {{ r.weight }}
{{ splitNote }}
Power · {{ volts }} V
{{ r.k }} {{ r.v }}
{{ c.name }} {{ c.serves }} {{ c.load }}
{{ powerNote }}
On-site hardwareclick a part for its step
{{ r.k }} {{ r.k }} {{ r.sub }} {{ r.v }}
{{ m10Note }}
Rules this planner follows. Sections cap at 4 ft and split as evenly as possible (8 → 4+4, 7 → 4+3, 6 → 3+3, 10 → 4+3+3). Sections ship pre-assembled, so on site the installer sets only 2 M8 bolts per module along each section seam, an X bracket with 4 M10 at every point where four modules meet on a seam, and an L bracket with 2 M10 every two modules around the perimeter — worst-case perimeter spacing.